Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 05228 | PTI TECHNOLOGIES INC. |
Federal Supply Class
Title
ENGINE FUEL SYSTEM COMPONENTS, A
Inclusions:
INCLUDES CARBURETORS; FUEL PUMPS; ENGINE FUEL FILTERS; FUEL CONTROLS, JET ENGINE; FUEL PRIMERS; WATER INJECTION CONTROLS AND VALVES; FUEL VALVES FUEL FLOW REGULATORS; COMPONENTS OF SMOKE ABATEMENT SYSTEMS.
Exclusions:
EXCLUDES AIRCRAFT FUEL TANKS (FSC 1560); IN-FLIGHT REFUELING SYSTEM FUEL COMPONENTS (FSC 1680). FUEL SYSTEM COMPONENTS NOT SPECIFICALLY DESIGNED FOR USE WITH AIRCRAFT ENGINES OR MISSILE PRIME-MOVERS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-25897,TYPE 1 CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| ADNP | DROP PRESSURE | 0.5 POUNDS PER SQUARE INCH |
| AZKQ | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 160.0 DEG FAHRENHEIT MAXIMUM |
| ADNH | FILTRATION RATING IN MICRONS | 40.0 NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| APGF | DESIGN TYPE | LIMITED |
| ADNQ | DIFFERENTIAL PRESSURE | 50.0 POUNDS PER SQUARE INCH |